Lab 05 · Cisco Modeling Labs

MPLS L3VPN with DMVPN Phase 3

IPv4 only. CE1 (AS 65001) is the DMVPN hub and peers eBGP to PE1. The provider core is AS 65000, OSPF plus LDP, with P as the VPNv4 route reflector in VRF CUST. CE2 is OSPF PE-CE at the far site. Spokes ride a Phase 3 overlay through INET.

MPLS L3VPN and DMVPN lab: CE1 to PE1, core routers P, PE1 and PE2, CE2 at site 2, and DMVPN spokes SPOKE1 and SPOKE2 behind INET.

What the drawing is showing

CE1's LAN is 10.1.0.0/24 and its tunnel address is 10.9.0.1. CE2's LAN is 10.2.0.0/24. The core carries MP-BGP VPNv4 for VRF CUST, RD/RT 65000:100, and the OSPF and LDP underlay is pre-configured. The DMVPN overlay is 10.9.0.0/24 with IPsec, NHRP, and EIGRP AS 200. The underlay to the spokes is 172.16.0.0/16 via INET. SPOKE1 (10.9.0.11, LAN 10.3.1.0/24) and SPOKE2 (10.9.0.12, LAN 10.3.2.0/24) connect with mGRE, and the Phase 3 shortcut is the spoke-to-spoke path. Built in Cisco Modeling Labs. Tunnel keys and fault injections are not on this site.

Covered here

  • MPLS LDP
  • VPNv4
  • VRF CUST
  • DMVPN Phase 3
  • EIGRP AS 200

All labs · eBGP and iBGP with route reflectors · DMVPN IKEv1 with a front-door VRF