Lab 03 · Cisco Modeling Labs

OSPF and EIGRP redistribution

IPv4 only. OSPF process 1, area 0 plus a stub area 10, on R1 through R4. EIGRP named mode, AS 100, on R5 through R8. R5 and R6 run both protocols and redistribute both ways, with tags 100 into OSPF and 110 into EIGRP.

OSPF and EIGRP lab: R1 through R4 in OSPF, R5 through R8 in named EIGRP, with R5 and R6 redistributing between the two domains.

What the drawing is showing

Router IDs are 10.255.0.x. The OSPF side links R1–R2–R3 across area 0, with R4 stub-attached under R2 in area 10, and loopbacks 10.1.1.0/24, 10.1.3.0/24, and 10.1.4.0/24. R5 sits under R1 and R6 under R3. R5 and R6 mutually redistribute. R7 and R8 are the EIGRP edge, tied together, with loopbacks 10.1.7.0/24 and 10.1.8.0/24; 10.1.8.0/24 is filtered out of OSPF. The lab is the path-control exercise: tags and filters decide what crosses the boundary. Built in Cisco Modeling Labs and graded automatically. The fault list stays off this site.

Covered here

  • OSPF area 0 and stub
  • Named EIGRP
  • Mutual redistribution
  • Route tags
  • Prefix filtering

All labs · VXLAN BGP EVPN multi-site · eBGP and iBGP with route reflectors