Lab 02 · Cisco Modeling Labs

VXLAN BGP EVPN multi-site

Two VXLAN fabrics, DC1 (site-id 100) and DC2 (site-id 200), tied together by border gateways that speak eBGP EVPN across an MPLS L3VPN provider. Each fabric has two spines, four leaves, and a pair of border gateways.

VXLAN EVPN multi-site lab: DC1 and DC2 leaf-spine fabrics with border gateways, connected across an MPLS L3VPN core of PE1 through PE4 and route reflectors P1 and P2.

What the drawing is showing

DC1 is fabric AS 651xx: spines DCI-SP1 and DCI-SP2, leaves DCI-L1 through DCI-L4, border gateways DCI-BGW1 and DCI-BGW2, and hosts H11 through H14. DC2 mirrors it as fabric AS 652xx, site-id 200, with DC2-SP1, DC2-SP2, DC2-L1 through DC2-L4, DC2-BGW1, DC2-BGW2, and hosts H21 through H24. The provider is AS 65000, IS-IS level 2 plus LDP, with VPNv4 and VPNv6. P1 and P2 are the route reflectors; PE1 through PE4 face the border gateways, and INET sits above the core. Border-gateway to border-gateway EVPN runs over that L3VPN. The fabrics use ingress replication, symmetric IRB, L3VNIs 50001 (TENANT-A) and 50002 (TENANT-B), anycast gateway MAC 2020.0000.00aa, and ARP suppression. An out-of-band network on 192.168.254.0/24 carries management, an automation host, and external NAT. Built in Cisco Modeling Labs. No answer key is published.

Covered here

  • VXLAN EVPN
  • Multi-site BGWs
  • IS-IS and LDP
  • VPNv4/VPNv6
  • Symmetric IRB

All labs · CCIE EI dual-stack enterprise · OSPF and EIGRP redistribution